How An Air Conditioner Compressor Works?
An air conditioning compressor is located inside every air conditioning unit. This compressor is used to cool the coolant in the system. The compressor is an important part of the cooling process. It compresses coolant as it passes through it to increase its temperature. Once the coolant has been heated, it is pumped into the condensing unit before being released into the atmosphere. This cooling process lowers the temperature of the air, which keeps us comfortable.
An air conditioner compressor that is not working properly can be caused by many things. Most commonly, an air conditioner compressor will fail due to a leakage or bust. A defective air conditioner compressor can not only cause problems but could also lead to more serious issues. Here are some possible problems your air conditioner might face if it breaks down.
Coolant leaks: Most air conditioning compressors have small holes, which are usually located around an evaporator. Warm air from the house can leak into the system through these small holes, causing it to heat up. This problem can easily be solved by installing new refrigeration coils. These coils are available from an air conditioning parts supplier.
Badly lubricated components – A faulty or worn out alternator, battery or motor can cause cooling problems in your air conditioner compressor. This happens when the alternator lacks hydraulic control parts that allow it to properly move the belt. The compression fittings, which connect the compressor’s refrigeration lines, are another common part that is worn out. These fittings should be replaced if they look rusty.
Overheating – If your air conditioning compressor is constantly overloading, it may cause your system to cool down unexpectedly. This happens often when an air conditioning system is being used in a room with a large heater. You will probably be surprised at how much heating cost really adds up over the month. Overheating can cause your refrigeration lines freeze up and begin to leak. If you notice that your AC compressor seems to be working harder than normal or that it takes longer to cool off when the AC is running, this might be caused by too many freezing refrigeration lines.
Frozen moving components – This is the most common reason for your air conditioner compressor to stop working. This is due to two factors. The first is that the moving parts don’t have enough refrigerant. The second reason is that the moving parts are becoming too hot and they are starting to fail. You will need to adjust the refrigerant levels of your air conditioner compressor to ensure that it is operating properly.
The Coil Rotates Around – If the AC’s refrigerant levels drop too low and freeze up, the coils around it might become too cold. These coils will rotate around inside the AC’s body until they get to a temperature where they are no longer conductive of the refrigerant gas. The problem with having these coils too cold is that they stop the refrigerant gas from flowing through them and therefore, you are losing refrigerant all the time, even if your AC’s refrigerant levels are above normal. Installing a larger diameter refrigerant tube will solve this problem. This will allow the coils to rotate freely and allow the AC to circulate its refrigerant.
Air Conditioner Repairs – Make sure your compressor is still under warranty and that it was installed at least a while ago. Many older compressors will need extensive repairs. When you have your AC’s compressor working properly, but it requires AC compressor maintenance, then the compressor is suffering a few problems inside. One of the most common problems with AC compressors is when the refrigerants in them become hard. Hard refrigerants need more heat to expand, which causes the compressor’s temperature to rise and eventually leads to its breakdown.